Orisec CT-10 - Page 27

27
Log Event
Description
Low Battery Restore XX
Low battery alarm on zone XX has restored.
Omit Key Active XX
Key omits activated by zone XX.
Omit Key Restore XX
Key omits by zone XX has restored.
Keyswitch Active XX
Keyswitch connected to zone XX is active.
Keyswitch Restore XX
Keyswitch connected to zone XX has restored.
Security Key Active XX
Security keyswitch connected to zone XX is active.
Security Key Restore XX
Security keyswitch connected to zone XX has restored.
Alarm Active
Intruder Alarm is active.
Bells Active
Bell output is active.
Re-arm Lockout Zone
Re-arm lockout has occurred and no more alarms can be generated for
the armed period.
Confirmed Alarm
Confirmed alarm generated (two different zones activated).
Confirmed PA Alarm
Confirmed PA alarm generated.
Remote Access XX
Remote access via PC number XX.
User XX
User access by user XX.
Access XX
Access user code type by user XX.
Duress XX
Duress alarm by user XX.
User Tag XX
User XX proximity tag access.
User Remote XX
User XX wireless remote has accessed the system.
User XX Lockout
User XX has been locked out from using the system.
User Tag XX Lockout
User XX proximity tag has been locked out from using the system.
Code Tamper X
Code tamper (invalid code) generated at keypad X.
Userr XX DELETED
User XX deleted from the system.
Exit Started XX
Exit mode started by user XX.
Exit Started Timer X
Exit mode started by control timer X.
Exit Started Zone XX
Exit mode started by zone XX.
Exit Stopped
Exit mode stopped.
Exit Failed by zone XX
Exit mode failed by zone XX.
Entry Started XX
Entry mode stared by zone XX.
Entry Timeout
Entry timeout alarm.
System Armed
System armed.
Keyswitch Arm
Keyswitch Armed.
Quick Armed
Quick Armed.
Part Armed 1
Part armed 1.
Part Armed 2
Part armed 2.
Part Armed 3
Part armed 3.