Orisec CT-10 - NFC Tags; Keypads

5
Your access code may not allow you to access certain system functions. For instance, if your
code is only allowed to arm the system you will not be able to disarm the system, once the
system is armed.
NFC Tags
NFC tags can be assigned to users of the system. The tag behaves just like an access code
when presented to the NFC reader built into the keypad. NFC technology is built into credit
cards, bank cards, smart phones and other devices. (Not on CK-10 or CT-10)
Keypads
One or more remote keypads will be installed throughout the protected premises, usually close
to the entry and exit door. The CK-10, CK-20, CT-10, and CT-20 control panels have built in
keypads.
Keypad Layout: RK-400-LCD & RK-450-LCD
1. LCD display
2. NFC reader – present your NFC tag in this area (not on CK-10 or CT-10)
3. Status Icons
4. Keyboard – see below
Keyed Keypad buttons
Actions
u
Arm system and to navigate upwards in the menu
p
Part arm system and to navigate down in the menu
r
Chime tone selection and can be used to enter menu
o
Omit zones and if held for 1 second can work to go ‘back’ in a menu
0
If held for 1 second can be used to toggle options and outputs
✓
Selection button
X
Cancel Button. Press and hold for 1 second to delete a selection.