Otto Bock A200 - 4.7 Product Identification & Labels

4.6 Further information
INFORMATION
The serial number required for enquiries and orders can be found on the nameplate. For explanations of the
nameplate, see the section "Nameplate" (see Page11).
4.7 Nameplate and warning labels
4.7.1 Signage on the product
The warning signs and nameplates are attached at the following mounting points to the power wheelchair:
CLOSE
CS:
DA:
DE:
EN:
ES:
FI:
FR:
Třída A
Klasse A
Klasse A
Class A
Categoria A
Luokka A
Classe A
HR:
HU:
IT:
NL:
NO:
PL:
PT:
Razred A
Osztály A
Classe A
Klasse A
Klasse A
Klasa A
Classe A
2
Warning signs and nameplates on the power wheelchair
4.7.2 Nameplate
The nameplates are found on the side of the frame under the seat.
Label Meaning
A Manufacturer’s product name
B CE marking
C Maximum load (see section “Technical data”)
D Maximum climbing ability (see section “Technical data”)
E Maximum speed (see section “Technical data”)
F Allowable axle load, front
G Allowable axle load, rear
H Allowable overall weight
I Manufacturer information/address
J Serial number
1)
K Manufacturing date
2)
L Symbol for medical device
M WARNING! Read the instructions for use before using the
product. Observe important safety-related information
(e.g.warnings, precautions).
11A200
Safety