CAUTION
Medical risks
Injuries, pressure sores due to application errors
► Regular measures for pressure redistribution and skin examinations are required. Should skin irritation and/or
skin reddening occur, consult the qualified personnel who adapted and adjusted the product. Do not continue
using the product without consultation.
28
Applying the lap belt
> Prerequisite: Note the positioning instructions in
the previous section.
1) Push the 2 halves together until the buckle engages
with an audible click.
WARNING! The lap belt has to fit closely but
not too tightly so the user is not injured. It
should be possible to slide two fingers com
fortably between the strap and thigh.
2) Pull to check that it is secure.
Opening the lap belt
1) Press the release button.
2) Open the belt buckle and lay the belt to the side.
Cleaning the belt system
INFORMATION
Observe the washing recommendations on the product and the information in the corresponding instructions for
use provided for the product.
• Straps with metal closures may not be washed in the washing machine as the penetration of water could
cause corrosion and subsequent malfunctions.
• Clean the belt straps by gently dabbing them with warm soapy water (with some disinfectant) or carefully wipe
with a dry, clean, absorbent cloth.
Additional cleaning instructions
• Allow the belts to air dry. Ensure that the belts and pads are completely dry before installation.
• Do not expose the belts to direct heat (e.g.sunshine, stove or radiator).
• Do not iron or bleach the belts.
8.13 Control unit accessories
8.13.1 Attendant control
The power wheelchair can be equipped with an optional separate control panel for attendant operation. The separ
ate control panel is angle-adjustable.
Functional overview
The attendant uses the attendant control to operate the driving function and the power seat functions.
The module is connected in conjunction with the control panel or as a separate input device.
40
Use
A200
To Next Page
Loading...
