Otto Bock A200 - 9.2 Repair Procedures; 9.2.1 Replacing Defective Fuse

Component Activity Prior to
every use
Weekly Monthly
Leg support,
mechanically elev
ating
Visual inspection for scratches and oil leaks on the pis
ton rod
X
Ensure padding is in perfect condition X
Check the attachment straps for wear X
Padding/straps
Check belt buckle for functionality X
Check air pressure (see tyre sidewall) X
Check for sufficient tread depth (min. 1 mm) X
Tyres
Check for damage X
Batteries Check battery charge level X
Check for external damage XLighting
Verify functionality X
Check whether the control device is functioning prop
erly (inform qualified personnel of any LED error mes
sages)
X
Check whether the battery charger is functioning prop
erly (inform qualified personnel of any LED error mes
sages)
X
Electronics
Check plug connections X
When brake is disengaged: check whether the LED
indicator on the control panel is flashing
XBrake
When brake is engaged: check braking function by try
ing to push the chair
X
Check whether mounting screws are fastened properly X
Check whether screw connections between the arm
support and the control panel are tight
X
Side panel and
arm support
Check arm support for damage X
Seat attachment Check whether mounting screws are fastened properly X
Gas compression
spring (option)
Visual inspection for scratches and oil leaks on the pis
ton rod
X
Product Check the legibility and completeness of all labels and
markings on the product
X
9.2 Repair
WARNING
Prohibited repairs
Severe user injuries, damage to the product due to adjustment and installation errors
► Only carry out the repairs described in this section. All other repairs may only be carried out by the qualified
personnel.
9.2.1 Replacing a defective fuse
INFORMATION
When replacing, only use fuses of the same type. Note the printed rating.
To replace a fuse: see Page18.
Should the fuse burn out repeatedly after a short time for no discernible reason, contact the qualified personnel.
51A200
Maintenance and repair