Otto Bock A200 - Technical Data; Dimensions and Weights; Application Class

The design, manufacturing and requirements for the intended use of the product are based on the expected life
time. These also include the requirements for maintenance, ensuring effectiveness and the safety of the product.
12 Technical data
INFORMATION
► Much of the technical data below is given in mm. Please note that product settings – unless otherwise spe
cified – cannot be adjusted in the mm range but only in increments of approx. 0.5cm or 1cm.
► Note that the values achieved during adjustment may deviate from the values specified below. The deviation
can be ±10mm and ±2°.
Application class (according to DIN EN 12184)
Class A
Dimensions and weights
Seat depth Standard seat: 340 – 500 mm (13.4" – 19.7")
Contour seat: 360 – 480 mm (14.2" – 18.9")
Standard seat Junior: 340 – 400 mm (13.4" – 15.7")
Seat width Standard seat: 340 – 480 mm (13.4" – 18.9")
Contour seat: 380 – 480 mm (15" – 18.9")
Standard seat Junior: 340 – 400 mm (13.4" – 15.7")
Seat height Standard seat: 430/480 mm (16.9"/18.9")
Contour seat: 510/560 mm (20.1"/22")
Standard seat Junior: 430/480 mm (16.9" – 18.9")
Lower leg length Standard seat: 250 – 470 mm (9.8" – 18.5")
Contour seat: 280 – 540 mm (11" – 21.3")
Standard seat Junior: 150 – 470 mm (5.9" – 18.5")
Dimensions and weights
Angle of the seat surface 0° – 6°
Angle of leg to seat 90° – 170°
Distance from arm support to seat 225–325 mm (8.9"–12.8")
Front position of the arm supports 300–580 mm (11.8"–22.8")
Arm support height 225–350 mm (8.9"–13.8")
Standard seat Junior: 205–275 mm (8.1"–10.8")
Arm support length 260mm (10.2")
Back support height 450/500/550mm (17.7"/19.7"/21.6")
Back support angle Manually, in 10° increments: -9°/1°/11°/21° or 0°/10°/20°/30°
Back support angle adjustment Mechanical: adjustable by up to 30°
Overall width 570mm (22.4")
Overall height 1030mm (40.6")
Overall length 1000mm (39.4")
Weight when empty* 66 kg (145.5 lbs)
Transport weights See "Weight", thereof:
Side panel: < 1kg (2.2lbs)
Leg support: approx. 1kg (2.2lbs)
Leg support, mechanically elevating: 1.8kg (4lbs)
Battery, removable: approx. 11kg (24.2lbs; each)
Max. load
(permissible user weight)
100kg (220lbs)
Model with standard seat, Junior: 75kg (165.3lbs)
Turning radius 870 mm (34.2")
Turning circle** 1290mm (50.8")
Caster wheel tyre size
Drive wheel tyre size
8" (puncture-proof)
12" (pneumatic); optional 12" (puncture-proof)
56
Technical data
A200