Owon XDS4000 Series - DMM Information Window

6.Use the Multimeter (Optional)
110
C
Testing diode
Testing for continuity
Measuring capacitance
Hold
ON OFF
Freeze the display during measurement.
Configure
Relative
When making relative measurements, reading is
the difference between a stored reference value
and the input signal.
Show Info
ON OFF
Show/Hide the information window
Auto Range
Select auto range mode
Alte Range
Select manual range mode, press to switch range
Voltage
mV V
Select the voltage range.
DMM Information Window
The Multimeter Information Window is displayed on the top right of the screen.
4
1 2
8
3
6
7
5
Figure 6-3 Multimeter Information Window
Description
1. Manual/Auto range indicators, MANUAL refers to the measuring range in
manual operation mode and AUTO refers to the measuring range in automatic
operation mode.
2. Measurement mode indicators:
A
------
Current measurement
V
------
Voltage measurement
R
------
Resistance
measurement
------
Diode measurement
------
Continuity test
C
------
Capacitance
measurement
3. Range.
4. Measurement display ("OL" is short for overload, indicates the reading
exceeds the display range)
5. Data hold mode is enabled.