Owon XDS4000 Series - How to Implement the Auxiliary System Function Setting

4.Advanced User Guidebook
80
name
VOLT
Voltage division,
divided by 400 is
ADC resolution.
4 bytes float
The value indicates
voltage (the unit is mV),
such as 200 mV.
6) SAMP
Parameter
name
Meaning
Value
Comment
SAMP
Sample rate
4 bytes float
The unit is Sa/s.
7) ADCB
Parameter
name
Meaning
Value
Comment
ADCB
ADC bit, ADC
resolution
4 bytes int
8-bit or 12-bit
8) CHAN
Parameter
name
Meaning
Value
Comment
CHAN
Number of
channels
4 bytes int
1 or 2
9) VOL2
Parameter
name
Meaning
Value
Comment
VOL2
Voltage division,
divided by 400 is
ADC resolution.
4 bytes float
The value indicates
voltage (the unit is mV),
such as 200 mV.
2.Data
The data type is signed integer. You can determine the data type (char, short int or int)
based on the BYTE parameter. The valid range is determined by the ADCB parameter,
e.g. the valid range for 8-bit ADC is -127 to +127.
How to Implement the Auxiliary System Function
Setting
●Config
Push the Utility button, select Function in the bottom menu, select
Configure in the left menu.
The description of Configure Menu is shown as the follows: