10.Technical Specifications
Performance Characteristics
Delta Volts between any two averages of
≥16 waveforms acquired with the same
scope setup and ambient conditions
(△V):
±(3% rdg + 0.05 div)
△V, △T, △T&△V between cursors,
auto cursor
Period, Frequency, Mean, PK-PK, RMS,
Max, Min, Top, Base, Amplitude,
Overshoot, Preshoot, Rise Time, Fall
Time, +Pulse Width, -Pulse Width,
+Duty Cycle, -Duty Cycle, Delay
A→B , Delay A→B , Cycle RMS,
Cursor RMS, Screen Duty, FRR、FRF、
FFR、FFF、LRR、LRF、LFR、LFF、
Phase A→B , Phase A→B , +Pulse
Count, -Pulse Count, Rise Edge Count,
Fall Edge Count, Area, and Cycle Area.
+, -, *, / ,FFT, FFTrms, Intg, Diff, Sqrt,
User Defined Function, digital filter (low
pass, high pass, band pass, band reject)
UART/RS232, I
2
C, SPI, CAN
USB Host, USB Device; Trig Out(Pass/Fail); LAN
port; VGA port; EXT Trig In
*(Only applicable to 4-channel models)
Max Sample rate (real time) for Dual CH should meet either following condition:
⚫ CH1&CH3 on, CH2&CH4 off;
⚫ CH2&CH4 on, CH1&CH3 off.