Owon XDS4000 Series - Page 80

4.Advanced User Guidebook
74
Once
Play back the wave just one time
Operate
Play
Stop
Begin to record
Stop recording
Storage: Save the current wave according to the start frame and end frame
set.
Storage menu shows as follows:
Menu
Setting
Instruction
Storage
Mode
Frame Set
Start frame
Turn the M knob to select the number of start
frame to store (1 - 1000)
End frame
Turn the M knob to select the number of end
frame to store (1 - 1000)
Save
Save the waveform record file to the internal
memory
Load
Load the waveform record file from the memory
To use wave record function, do as follows:
(1) Push Save button.
(2) Select Type in the bottom menu, in the left menu, turn the M knob to select
Record.
(3) Select Mode in the bottom menu, select OFF in the right menu.
(4) In the bottom menu, select Storage as Internal.
(5) Select Mode in the bottom menu, select Record in the right menu.
(6) Select FrameSet in the bottom menu, set End frame and Interval in the
right menu.
(7) In the bottom menu, set Refresh.
(8) In the bottom menu, select Operate as Play.
(9) Select Mode in the bottom menu, select Playback in the right menu. Set
FrameSet and Playmode, select Operate as Play.
(10) To save the wave recorded, select Mode in the bottom menu, select
Storage in the right menu. Select FrameSet in the bottom menu to set the
range of frames to store, select Save in the bottom menu.
(11) To load the waveform from the internal memory, select Load in the bottom
menu, then enter the Playback of the Mode to analyze the wave.
Note: When playbacking the waveform, the sampling, trigger, or display
function is not available.
When storage medium is External, Wave Record contains two modes:
OFF, Record.
Record menu (External Storage) shows as follows:
Menu
Setting
Instruction
Mode
OFF
Record
Close wave record function
Set record menu