104
Instruments and controls
The figure shows the minimum values that can be set when the Eco Mode function is
active.
AACC off.
B DSC is set 5 km/h above the
cruise control set speed.
C PCC is set maximum 6 km/h
below the cruise control set
speed.
Whit Eco Mode switched off, see
section 'Eco Mode function' in chapter
'Driver assist systems', the following
minimum values can be set.
AACC off.
B DSC is set 3 km/h above the
cruise control set speed.
CPCC off.
While driving
Use the switches on the left side (A, B and C), to control the truck phone and coupled
bluetooth phones when active or if no calls are made or received the DAF radio or TNR.
See section 'Operating the telephone using the steering wheel switches' in chapter
'Instruments and controls' or the radio/TNR manual.
While driving, normally only the variable speed limiter and cruise control functions are
available using the switches on the right (D, E and F). For special applications, engine
speed functions while driving are available after a separate dashboard switch is
operated.
Variable speed limiter setting:
D005156-2
D005157-2
DW63246305.book Page 104 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
