125
Instruments and controls
A Not used
B Tick mark. Visible when soft key
(14) is used to confirm timer
settings
C Rest heat available
D Scroll back and forward to select
day or time
E 12 or 24-hour scale selected via
master display
F Temperature or hours or selected
day display
G Celsius or Fahrenheit scale
selected via master display
H Auxiliary heater timer is set
I Return to main display
J Enter settings
K Manual selected fan speed (five
speeds)
NOTE: The Climate Control Panel uses the temperature and time settings
as set on the instrument panel.
Operating the heating, ventilation and air conditioning
system
NOTE: Ventilation is very important for comfort inside the cabin. Not just
while driving, but also when spending the night in the cabin.
If the night is spent in the cabin, ventilate by opening the roof hatch, for
instance.
Temperature setting
The desired cabin temperature is set by rotating switch (2) clockwise for a higher
temperature and anticlockwise for a lower temperature. The set temperature is shown
on display (1).
The desired cabin temperature can also
be set using switch (3) on the bunk
console.
The set temperature is shown on both
the display of the bunk console as on
the display of the cabin control panel
(CCP). If the auxiliary heater is used,
the set temperature is also displayed on
the bunk console display (1).
'AUTO' mode
In the 'AUTO' mode the system automatically controls the cabin climate by;
– Maintaining the set temperature by operating heater and or air conditioning.
D005097
1
32
DW63246305.book Page 125 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
