161
Master display
G1. General warning
This warning indicator is visible when there is a fault in a vehicle system.
The master display shows which vehicle function has triggered the
warning.
G2. Diesel Particulate Filter
When the soot level in the DPF or soot filter is (too) high, or the filter is
contaminated, this warning indicator is visible.
G3. Inter-axle (longitudinal) differential lock
This warning indicator is visible when the inter-axle differential lock is
active.
See section 'Differential lock' in the chapter 'Driving'.
G4. Cross-axle (transversal) differential lock
This warning indicator is visible when the cross-axle lock is active.
See section 'Differential lock' in the chapter 'Driving'.
G5. PTO
This warning indicator is visible when the PTO is active.
G6. Right direction indicator, trailer
On a truck and trailer (semi-trailer) combination, this warning indicator
flashes together with the trailer direction indicators (semi-trailer).
G7. Right direction indicator, truck
This warning indicator flashes together with the truck direction
indicators.
H1. Tachometer display
If the Eco Mode function is switched off, the text 'Eco off' (H1d) is shown
to the right of the selected gear. See section 'Eco Mode function' in the
chapter 'Driver assist systems'.
The gearbox settings are visible in the tachometer display.
Automated gearbox:
– Current gear indicator (H1b).
– Manoeuvre mode setting (H1e).
– Manual or automatic mode (H1a and H1c).
– Off-road mode active (H1h).
Manual gearbox:
– High or low gearing selected (splitter) (H1g).
– Gear shift advice (H1f).
DW63246305.book Page 161 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
