191
Coupling and uncoupling
Trailer coupling with manual
unlocking
– Pull the safety pawl (A) out of the
coupling and rotate it 90°.
– Pull the lever (B) up. The coupling
pin is now raised and ready for
coupling.
– Reverse the truck slowly until the
trailer coupling closes.
–
Safety pawl (A) unlocked: coupling
unsafe!
Safety pawl (A) closed: coupling
safe.
– After coupling, always check whether the safety pawl (A) is in the locked position.
See the manufacturer's operating instructions
NOTE: If the safety pawl (A) is not locked, the coupling is not safe and
you must couple the trailer again.
– Connect the brake pipes and the cables for the lighting and ABS/EBS.
D001596-2
A
B
D001597-2
A
A
DW63246305.book Page 191 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
