192
Coupling and uncoupling
NOTE: When coupling, check the coupling head rubbers of the air pipes
of both the truck and the trailer for possible damage.
–
Trailer coupling with automatic
unlocking
– Pull the lever (B) up; the locking
indicator pin (A) shoots out. The
coupling pin is now raised and ready
for coupling.
– Reverse the truck slowly until the
trailer coupling closes.
Locking indicator pin (A) in unlocked
position: coupling unsafe!
Locking indicator pin (A) fully level
with the front: coupling safe.
– After coupling, always check
whether the locking indicator pin (A)
is in the locked position. See the
manufacturer's operating
instructions.
NOTE: If the locking
indicator pin (A) is not
fully level with the front,
the coupling is not safe
and you must couple the
trailer again.
– Connect the brake pipes and the
cables for the lighting and ABS/
EBS.
A
B
D001600-2
A
D001601-2
A
DW63246305.book Page 192 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
