Paccar DAF CF - 13.15 Replacing bulbs

342
13
Emergency repairs
Main and dipped beam and indicator lights
1. Switch off the lights before replacing
bulbs.
2. Open the door.
3. Remove the attachment bolts (1) in
the stepwell.
4. Remove the upper cover (2).
5. Depicted is an LED headlight. Twist
the service cap (1) to the left and
remove it.
NOTE: One service cap
for the LED headlight
(main beam) and two for
the halogen headlight.
The upper one on the
halogen headlight
corresponds to dipped
beam and the lower one
corresponds to main
beam.
Main beam
6. Disconnect the connector from the
bulb of the main beam.
7. Press the bulb fixing bracket
downwards and remove the bulb.
NOTE: Only touch the
glass of a halogen bulb
with a clean, dry cloth.
8. Fit the new bulb in the reflector so
that it drops into the relevant recess
in the reflector.
NOTE: If the bulb has
been fitted correctly it
cannot turn in the
reflector.
9. Connect the connector.
10. Press the bulb fixing bracket upwards and make sure that it latches into the
recesses correctly.
D001829
2
1
D001836-2
2
1
D005058
2
1
DW63246305.book Page 342 Friday, March 22, 2019 4:54 PM