85
Instruments and controls
Instrument panel location B
B.(1). PTO 3 switch
PTO 3 is an engine or NMV PTO. Use this switch to switch PTO 3 on or
off.
A green indicator light in the switch indicates that the PTO is activated.
NOTE: This switch has a lock to prevent accidental operation of the switch.
NOTE: Via an optional setting on vehicles with air suspension it is possible
that operating this switch lowers the air suspension on to its bump stop.
With the vehicle on its bump stop the remote control is switched off.
If the PTO is switched of the remote control becomes active again and the
vehicle can be brought back on driving height. See section 'Remote control'
in the chapter 'Air suspension'.
B.(2). PTO 2 switch
PTO 2 is a gearbox PTO. Use this switch to switch PTO 2 on or off.
See section 'PTO (Power Take Off)' in chapter 'Driving'.
NOTE: This switch has a lock to prevent accidental operation of the switch.
NOTE: Via an optional setting on vehicles with air suspension it is possible
that operating this switch lowers the air suspension on to its bump stop.
With the vehicle on its bump stop the remote control is switched off.
If the PTO is switched of the remote control becomes active again and the
vehicle can be brought back on driving height. See section 'Remote control'
in the chapter 'Air suspension'.
B.(3). PTO 1 switch
PTO 1 can be an engine PTO or a gearbox PTO. Use this switch to
activate or deactivate PTO 1.
See section 'PTO (Power Take Off)' in chapter 'Driving'.
NOTE: This switch has a lock to prevent accidental operation of the switch.
DW63246305.book Page 85 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
