88
Instruments and controls
4. Flasher hazard warning lights switch
Use this switch to turn the hazard warning lights on and off. The lighting
in the switch indicates that the hazard warning lights are switched on.
5. Automated gearbox drive mode rotary knob.
This knob is used to select forward or reverse drive mode of the
automated gearbox. See chapter 'Automated gearbox'.
6. Heating and ventilation system control panel (CCP).
For detailed functions see section 'Heating, ventilation and air
conditioning'.
7. Menu Control Switch
Turn the Menu Control Switch to switch screens in the main menu. When
the switch is pressed, the function or information selected is displayed,
and subsequently any sub-menus are displayed.
See chapter 'Master display'.
8. Park brake handle
See section 'Brakes' in the chapter 'Driving'.
Control panel location C
C.(1). Advanced Emergency Braking System (AEBS) on/off switch.
AEBS is preselected as on by default. Use this switch to disengage and
engage AEBS.
See section 'Advanced Emergency Braking (AEBS)' in chapter 'Driver
assist systems'.
C.(2). LDWS switch
Press this switch to disengage and engage the LDWS (Lane Departure
Warning System). LDWS is on by default.
See section 'Lane Departure Warning System (LDWS)' in the chapter
'Driver assist systems'.
C.(3). DPF switch
Switch to initiate (to start), stop or inhibit regeneration of the Diesel
Particulate Filter (DPF).
Upper side: Initiate regeneration, DPF
See section 'Regenerating DPF, Emission Aftertreatment System' in the
chapter 'Driving'.
DW63246305.book Page 88 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
