Panasonic AG-7350 Series - Removal of the Front C.B.A; Removal of the Front Panel; Removal of the Rear Panel with Rear Jack C.B.A

>
..J
ID
:!E
w
U)
U)
<(
U)
Q
2-2-5. Removal of the Rear Panel with Rear Jack
C. B.A.
1. Unscrew the 8 screws (E) on the Rear Panel
(Figure D6).
2. Lift the Rear Panel with Rear Jack C. B.A. and
carefully pull the panel off the unit.
[Rear View]
8
Screws (E)
Figure D6
2-2-6. Removal of the Front Panel
1. Pull out the 4 knobs (F) on the Front Panel
(Figure D7).
2. Pu II out the Jog/Search Dial Knob on the Front
Panel (Figure D7).
[Front View]
D
4 Knobs (F)
Figure D7
Jog/Search
Dial Konb
3. Unscrew the 3 screws (G) on the top of the
Front Panel (Figure D8).
4. Unlock the 3 locking tabs (H) on the top of the
Front Panel and the 2 locking tabs (I) on the
bottom of the Front Panel (Figure D8 and Figure
D9).
[Top View]
Locking
Tab (H)
Locking
Tab (H) 3 Screws (G)
Figure D8
Locking
Tab (H)
2-4
[Bottom View]
Locking Tab
(I)
Locking Tab (I)
0
0
Figure D9
2-2-7. Removal of the Front C.B.A.
1. Unscrew the 4 screws (J) on the Search Dial
Unit and pull out the connector P6207 (Figure
D10).
2. Lift the Search Dial Unit.
[Front Panel Inside View]
4
Screws (J)
Figure D1 0
3. Unscrew a screw (K) on the Front C.B.A. (Figure
D11).
4. Unlock the 3 locking tabs (L) on the Front
C.B.A. and carefully lift the Front
C.B.A.(Figure D11 ).
[Front Panel Inside View]
3 Locking Tabs (L)
Front C.B.A. Screw (K)
Figure D 11