Panasonic AG-7350 Series - And Video (3) C.B.A; Opening of the C.b.hold Piece (A) and (B)

>
..J
r::a
:::E
w
Cl)
Cl)
<(
Cl)
c
2-2-13. Opening of the C.B.Hold Piece (A) and (B)
1. Open the C.B. Hold Piece (A) and (B) from unit
by minus driver or the same (Figure 018 and
Figure
0 19).
[Top View]
Video (1) C.B.A.-!1--f--Jt-t'-.
Video (2) C.B.A.
Video
(3) C. B.A. -~t--t--"Tll
~~
C.B. Hold Piece (A)
~
Audio (1) C.B.A.-~«==·n IF=== ~
Audio (2) C.B.A.-~==91 H==== L___j
C.B. Hold Piece (B)
Figure 018
[Top View]
C.B.
Hold Piece
Figure 019
2-2-14. Removal of the Video (1) C. B.A., Video (2)
C.B.A. and Video (3) C.B.A.
1. Open the C.B. Hold Piece (A) as shown in Figure
018.
2. Carefully pull out the Video (1) C. B.A., Video
(2) C.B.A. and Video (3) C.B.A.
from Mother
C. B.A.
2-2-15. Removal of the Audio (1) C.B.A. and Audio
(2) C.B.A.
1. Open the C.B. Hold Piece (B) as shown in Figure
018.
2. Carefully pull out the Audio (1) C. B.A. and
Audio (2) C.B.A. from Mother C.B.A.
2-6
2-2-16. Opening of the Servo & System Control
C. B.A.
1. Unscrew the 3 screws (S) on the Servo & System
Control C.B.A. and open the Servo & System
Control C.B.A. by unlock a locking tab
(T)(Figure 020 and Figure 021).
2. Remove the flatcables (P6001, P6002 and
P6003)(Figure 021 ).
[Bottom View]
Locking
Tab (T)
[Bottom View]
Servo & System
3 Screws
(S) Control C.B.A.
Figure 020
Flatcables
(P6001, P6002 and P6003)
Figure 021
Servo &
System
Control C.B.A.