Panasonic AG-7350 Series - 3-4. Maintenance Procedures

w
0
z
<
z
w
....
z
<i
:E
3-4. MAINTENANCE PROCEDURES
3-4-1. HOW TO EJECT MANUAL Y
If the electrical circuit is defective and the
action of unloading and front unloading don't work
properly, it 1s possible to eject manually as
follows.
Capstan Rotor
RELEASE DIRECTION J
Worm shaft
1. Take out the Main AC.
2. Release the direction as shown in Figure M3.
3. Rotate the Wormshaft to clockwise unti I
cassette is ejected.
Figure M3
3-4-2. CYLINDER MAINTENANCE PROCEDURES
A. Procedures for Cleaning of the Cylinder Unit
1. Position the video head to permit access for
cleaning and hold the upper cylinder to keep it
from turning while cleaning.
2. Gently rub the video head in direction of tape
travel with Head Cleaning Stick moistened with
Cleaning Liquid.
3. Repeat for the other video heads. (Figure M4)
Lower Cylinder
Video Head
Cleaning Stick
Figure M4
3-4
*Notes:
1. Do not rub vertically.
2. Do not apply any pressure to heads.