Panasonic AG-7350 Series - Removal of the Cassette Compartment Unit; Removal of the Mother C.B.A; Removal of the Power Detection C.B.A; Removal of the Reel Servo C.B.A

2-2-17. Remova I of the Mother C. B.A.
NOTE : Before removing the Mother C.B.A., be sure
to remove the Front C.B.A., Rear Jack
C. B.A. Video (1) C. B.A., Video (2) C. B.A.,
Video (3) C. B.A., Audio ( 1) C. B.A. and
Audio (2) C.B.A.
1. Unscrew the 8 screws (U) on the Mother C.B.A.
(Figure D22).
2. Lift the Mother C. B.A.
(Bottom View]
8 Screws (U)
Figure D22
2-2-18. Removal of the Power Detection C.B.A.
1. Unscrew the 3 screws (V) on the Power Detection
C.B.A. (Figure D23).
2. Unlock a locking tab (W) on the Power Detection
C.B.A. and lift the Power Detection C.B.A.
(Figure D23).
(Bottom View]
Power
Detection
C. B.A.
0
Locking Tab (W) 3 Screws (V)
Figure 023
0
2-2-19. Removal of the Reel Servo C.B.A.
1. Unscrew the 4 screws (X) on the Reel Servo
C.B.A. (Figure D24).
2. Lift the Reel Servo C. B.A.
[Bottom View]
Reel Servo
C. B.A.
4 Screws (X)
Figure D24
2-2-20. Removal of the Cassette Compartment
Unit
1. Unscrew the 2 screws (Y-1) and a screw (Y-
2)(Figure D25).
2. Disconnect 2 wires and 4 wires from P1508 on
the right side of the Cassette Compartment
Unit (Figure D25).
3. Remove the Top Plate.
2-7
[Top View]
Cassette
Compartment
Unit
2 Screws (Y-1)
Screw (Y-2) P1508
Figure D25
>
..J
m
:!
w
CJ)
CJ)
ct
CJ)
c