Panasonic AG-7350 Series - Page 44

1-
z
w
::!!:
l-
en
;:)
...,
c
<C
...1
<C
(.)
z
<C
:I:
(.)
w
::!!:
(No Good)
Waving
or Frilling
Figure M12
8. If curling appears, readjust P5 post.
4-6
4-2-4. COARSE ADJUSTMENT OF THE
A/C HEAD HEIGHT
<<NOTE>>
This procedure should be performed only when the A/C Head is
replaced.
<<TOOL>>
Check Light ; VFK0343
Nut Driver ; Purchase locally
1. With the tape running, look at the lower edge of the
control
head by using the check light.
2. Adjust the Nut (A) as shown in Figure M13 by turning
the Nut (A) clockwise to lower the head, and counter-
clockwise to
raise it.
Nut (A)
Control Head
---- A/C Head Base Unit
Figure M13