- 56 -
About White Balance modes
*1 This setting is selected automatically when one of the following operations is performed:
j Set [ATW] to [ON] and switch to Auto Mode. (l 36)
j Press the USER button to which [ATW] is registered. (l 74, 78)
j Set the WHITE BAL switch to the position corresponding to your [ATW SET] (l 152) setting.
*2 You can set this mode with a USER button.
≥ In the following cases, even if you press the USER button to which [ATW] is registered or change
the position of the WHITE BAL switch, the White Balance mode cannot be changed:
j In Auto Mode with [ATW] set to [ON]
j During Freeze Frame (l 81)
≥ [RB GAIN CONTROL SETTING] allows you to fine-adjust the color balance for each position of
the WHITE BAL switch. (l 134)
Mode Settings
ATW (ATW)
*1
It will automatically adjust in accordance with the recording condition.
LOCK
(ATW Lock)
*2
It will lock the setting for ATW. (l 57)
P3200K
(P3200K)
Preset value for studio/indoor recording (halogen lamp, etc.)
P5600K
(P5600K)
Preset value for outdoors
VAR (VAR)
Setting can be finely adjusted in accordance to the recording conditions.
(l 58)
Ach (Ach)
Setting can be optimized for the scene to be recorded when you set the
WHITE BAL switch to [A]. (l 58)
Bch (Bch)
Setting can be optimized for the scene to be recorded when you set the
WHITE BAL switch to [B]. (l 58)
To Next Page
Loading...
