17
VQT2J52
Basic
operations
While stopped
Press [STATUS ] to show the information
screen.
To switch information of the current programme and the next
programme
Press [2, 1].
To show detailed information about the programme
Press [STATUS ]
again (only when “info ” is displayed).
To hide the information screen
Press [STATUS ] once or twice.
Signal Quality
You can also select the other channel when the information screen is
displayed by pressing [3, 4] and [OK].
∫ If New Channel Message appears
When a DVB channel is added, this unit will be informed
automatically. Then the confirmation message appears. If you
select “Yes”
on the display, Auto-Setup starts (all channel settings
are deleted. The timer recording programmes are also cancelled.).
The display/hide setting can be changed (> 62, New Channel
Message).
Digital channel information
No Signal: The digital broadcast signal is not being received.
No Service: No broadcasts are currently available.
If “No Signal” is displayed:
≥Check that the current digital broadcast channel is correctly
broadcasting.
352 ABC2
No Signal
All Channels
18:53
Change Category
info
ABC News
19:00 - 19:30
NOW
Multi Audio
Encrypted
Subtitle
During scrambled broadcasting
(Cannot be viewed with this unit.)
Programme is broadcast in multi-channel
sound (> 16)
To change the audio language (> 63, DVB
Preferred Language)
Category
(Favourite
>
62)
Channel and
Station Name
Programme name and Broadcast time
Change the
category
Signal Quality
(> below)
Subtitle (> 16)
Progress of the
current
programme
Note
A new DVB Channel has been found.
Start DVB Auto Setup?
Selecting DVB Auto Setup will delete
all Timer Programmes.
New Channel
No Yes
OK
RETURN
DMR-EZ49VEGEC-VQT2J52_eng.book 17 ページ ２０１０年１月７日 木曜日 午後４時０分
To Next Page
Loading...
