31
VQT2J52
Advanced
operations
≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
A Icons
B Message displayed in the “Drive space” line
(Except for [VHS])
When the drive is set to VHS, “– –” is displayed.
C Channel name, programme name and other
information are displayed.
∫ To change a programme
Press [3, 4] to select the programme and press [OK]. (> 30)
∫ To delete a programme
Press [3, 4] to select the programme and press [DELETE ¢].
You can also delete a programme with the following steps
1 Press [3, 4] to select the programme and press [OPTION].
2 Press [3, 4] to select “Delete” and press [OK].
∫ To release the unit from recording standby
Press [3, 4] to select the programme and press the “Red”
button.
≥The timer icon “F” disappears from the timer recording list.
≥You cannot cancel timer recording standby mode as long as even
one timer icon “F” remains in the timer recording list.
≥Press the “Red” button again to activate timer recording standby.
∫ To resolve overlapping
Press [3, 4] to select the programme with and press [OK].
≥If the “Overlapped Timer Recording” screen appears (> right)
≥If the on-screen instructions do not appear, change or delete the
overlapped programme.
∫ To exit the timer recording list
Press [PROG/CHECK].
≥Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
1 While the unit is on
Press [∫].
2 Press [2, 1] to select “Stop
Recording” and press [OK].
If you stop a timer recording, it will be cancelled. However, if
you have set a weekly or daily timer recording, the recording
will start from the next time the timer recording is set.
If you set a timer recording that will overlap with other timer
recordings, the “Overlapped Timer Recording” screen appears to
help you resolve the overlapping.
Follow the on-screen instructions.
In timer recording of digital broadcast with multi-audio or multi-
subtitle, audio and subtitle language to be recorded will follow the
setting of “DVB Preferred Language” in the Setup menu (> 63).
≥When a timer recording is set, DVDs that were recorded using a
different TV System (PAL/NTSC) cannot be played unless the TV
System is changed in the Setup menu (> 66) or the timer
recording has completed or has been cancelled.
≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even when
playing.
≥Timer recordings do not begin while editing or copying in normal
speed mode (> 52).
≥If the unit is turned on when timer recording begins, it remains
turned on after recording finishes. It does not turn off automatically.
You can turn the unit off during timer recording.
≥When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programmes.
Check, change or delete a programme,
or resolve overlapping
F Timer recording standby is activated.
[ This programme is currently recording.
Programmes are overlapped. Recording of the programme
with the later start time starts when the earlier programme
finishes recording.
You stopped a daily or weekly timer recording. The icon
disappears the next time the timer programme starts recording.
The disc was full so the programme failed to record.
The programme was copy-protected so it was not recorded.
X The programme did not complete recording because the disc
is dirty or some other reason.
Drive Recording drive is set to DVD or VHS.
OK: Displayed if the recording can fit in the remaining
space.
> (Date): For recordings made daily or weekly, the display will
show until when recordings can be made (up to a
maximum of one month from the present time) based
on the time remaining on the disc.
! : It may not be possible to record because:
≥the disc is write-protected.
≥there is not enough space left.
≥the number of possible titles has reached its
maximum.
≥programmes are overlapped.
≥programmes are deactivated.
Timer
Recording
1:34 SP
2:59 SP
DVD
VHS
Remain
RETURN
OK
Press OK to store new programme.
Mode
STTL
Stop Start
No.
Date
Drive
Channel
Drive
space
New Timer Programme
TUE 12.10.10. 12:54:00
Note
To cancel recording when recording
has already begun
If the “Overlapped Timer Recording”
screen appears
Language for digital broadcast with
multi-audio or multi-subtitle
(Digital broadcast only)
Notes on timer recording
Stop Recording
Stop Recording
Cancel
Timer recording in progress.
Stop this timer recording ?
It will be cancelled if you stop.
OK
RETURN
SELECT
Not recorded
Programme
Recorded Recorded
Programme
DMR-EZ49VEGEC-VQT2J52_eng.book 31 ページ ２０１０年１月７日 木曜日 午後４時０分
To Next Page
Loading...
Need help?
General
