55
VQT2J52
Copying
Copying still pictures
[RAM] [USB] > [RAM]
4 Register still pictures for copy.
≥If you are going to copy a registered list without making any
changes to it (> step 5).
You can register still pictures or still picture folders.
≥
Still pictures and folders cannot be registered on the same list.
∫ To register individual still pictures
1 Press [3, 4] to select “Create List” and press [1].
2 Press [3, 4] to select “New item” and press [OK].
3
Press [
3
,
4
,
2
,
1
] to select the still picture and press [
;
].
A check mark is displayed. Repeat this step until you select
all necessary items.
≥Press [;] again to cancel.
≥
The items will be copied in the order of the copying list. If you
want to specify the order, repeat selecting one item at a time.
≥To show other pages (> right)
≥To select another folder (> right)
4 Press [OK].
≥To edit the copying list (> right)
5 Press [2] to confirm.
∫ To register on a folder by folder basis
1 Press [3, 4] to select “Create List” and press [1].
2 Press [3, 4] to select “Picture/Folder” and press [OK].
3 Press [3, 4] to select “Folder” and press [OK].
4 Press [3, 4] to select “New item” and press [OK].
5 Press [3, 4] to select the folder and press [;].
A check mark is displayed. Repeat this step until you select
all necessary items.
≥Press [;] again to cancel.
≥
The items will be copied in the order of the copying list. If you
want to specify the order, repeat selecting one item at a time.
≥To show other pages (> right)
6 Press [OK].
7 Repeat steps 4–6 until you select all necessary folders.
≥To edit the copying list (> right)
8 Press [2] to confirm.
5 Press [3, 4] to select “Start
Copying” and press [OK].
≥Only when copying individual still pictures.
When specifying another folder as the copying destination,
select “Folder”.
6 Press [2, 1] to select “Yes” and
press [OK] to start copying.
To stop copying
Press and hold [RETURN ] for 3 seconds.
To return to the previous screen
Press [RETURN ].
≥Copy Mode is fixed at “PICTURE High Speed”.
≥The structure of folders on the USB memory may not be the same
at the copy destination.
≥The sequence in which the still pictures are registered on the copy
list may not be the same at the copy destination.
≥If the space on the destination drive runs out or the number of files/
folders to be copied exceeds the maximum (> 14), copying will
stop partway through.
≥You cannot copy the information about the picture rotation.
∫ To edit the copying list
Select the item in step 4–4 (for a still picture) or 4–6
(for a folder) (> left)
1 Press [OPTION].
2
Press [
3
,
4
] to select the operation and press
[OK].
Delete All:
Delete all items registered on the copying list.
Press [2, 1] to select “Yes” and press [OK].
Add:
Add new items to the copying list.
1 Press [3, 4, 2, 1] to select the still picture or folder and press
[;].
A check mark is displayed. Repeat this step until you select all
necessary items.
≥Press [;] again to cancel.
2 Press [OK].
Delete:
Delete the selected items.
Press [2, 1] to select “Yes” and press [OK].
To cancel all registered copying settings and lists
After performing steps 1–3 (> left)
1 Press [3, 4] to select “Cancel All” and press [OK].
2 Press [2, 1] to select “Yes” and press [OK].
≥The settings and lists may be cancelled in the following situations.
– When a still picture, etc. has been recorded or deleted at the
copy source
– When steps have been taken, for instance, to turn off the unit,
remove the USB memory, open the tray, etc.
∫ To select another folder
After performing step 4–
2
(
> left,
To register individual still pictures)
1 Press [3, 4, 2, 1] to select “Folder” and press [OK].
2 Press [3, 4] to select the folder and press [OK].
You can also select folders with the numbered buttons.
≥The still pictures of different folders cannot be registered on the
same list.
[RAM] > [RAM]
After performing steps 1–3
(> 52, Copying Titles or Playlists (DVD > VHS))
1 Set “Source” and “Destination” to
“DVD”. (Go to step 4)
[USB] > [RAM]
1 While stopped
Insert the USB memory (> 15).
The menu is automatically displayed. (> 38)
2 Press [3, 4] to select
“Picture ( JPEG )” and press [OK].
3 Press [3, 4] to select “Copy
Selected Pictures ( JPEG )” and
press [OK].
“Source”, “Destination”, “Format” and “Recording Mode” are
automatically set to “USB”, “DVD”, “PICTURE” and “High
Speed” respectively.
Copy
USB
DVD
1
2
3
Source
Destination
Cancel All
Copy Direction
Copy Mode
Create List
USB DVD
PICTURE
High Speed
0
Copy
Destination Capacity: 4343MB
No. Size
1
2
3
Cancel All
Picture
Copy Direction
Copy Mode
Create List
Picture/Folder
Start Copying
USB DVD
PICTURE
High Speed
Name of item
Page 01/01
Create copy list.
New item (Total=0)
Copy
Destination Capacity: 4343MB
No. Size
1
2
Cancel All
Picture
Copy Direction
Copy Mode
Picture/Folder
USB DVD
Name of item
New item (Total=0)
To show other pages
Press [3, 4, 2, 1] to select “Previous” or “Next” and press [OK].
≥You can also press [:, 9] to show other pages.
Folder
Make a new folder and dub ?
New folder
001 100__DVD
002 101__DVD
003 102__DVD
---
-
New folder
--
Note
Add
Delete
Delete All
Create List Picture (JPEG)
Previous
001/001
Next
Folder JPEG
---- ---- ----
OK
RETURN
Page
0001
0002
0003
0004
----
----
----
--------
OK
RETURN
Folder
Create List
Page 01/01
Picture 0012 File 0012
001 100__DVD
002 101__DVD
003 102__DVD
---
USB
\101__DVD
---
---
---
004 103__DVD
USB
DMR-EZ49VEGEC-VQT2J52_eng.book 55 ページ ２０１０年１月７日 木曜日 午後４時０分
To Next Page
Loading...
Need help?
General
