Watching broadcasts
VQT2J58
20
Watching broadcasts
This unit temporarily saves a live TV programme you
are watching with this unit’s tuner on HDD and you
can use the following functions.
≥Select the HDD drive to perform these functions
correctly.
1 While watching TV
∫REWIND LIVE TV
Press [6] to rewind.
≥“REWIND LIVE TV” appears on the unit’s
display.
∫PAUSE LIVE TV
Press [;] to pause.
≥“PAUSE LIVE TV” appears on the unit’s
display.
2 When you want to resume
Press [1](PLAY/a1.3).
≥You can perform search or Quick View, etc.
≥If temporary save stops (
> right), playback will
be performed by that point.
To stop REWIND LIVE TV or PAUSE LIVE TV
1 Press [∫].
2 Select “Yes”, then press [OK].
To display the status
Press [STATUS ].
∫ When watching a programme with this tuner
1 The time that you can rewind the live programme.
2 The time of the current playback position.
3 The time which is 2 hours after PAUSE LIVE TV or
REWIND LIVE TV started.
≥After 2 hours from PAUSE LIVE TV or REWIND
LIVE TV started, current time is displayed.
∫ (PAUSE LIVE TV only)
When watching a programme via external input
4 The time of the current playback position.
≥ Temporary save stops in the following cases:
– When switching to other channels or other screen
– When recording of the watching programme is started
– When 2 programmes simultaneous recording is started
– When performing PAUSE LIVE TV or REWIND LIVE TV
for more than 8 hours (This may vary depending on the
HDD free space.)
≥ These functions do not work in the following cases:
– When the clock is not set.
– While recording 2 programmes simultaneously
– While copying
– While watching a programme being recorded
– When a radio programme is selected
– (REWIND LIVE TV only)
When “REWIND LIVE TV” is set to “Off” (> 79)
– (PAUSE LIVE TV only)
When a timer recording via external input is started
while watching a programme via external input
REWIND LIVE TV/PAUSE LIVE
TV
REWIND LIVE TV
You can rewind live TV programme up to 2 hours
before as long as temporary save has not been
stopped.
PAUSE LIVE TV
You can pause live TV programme and restart
watching from the paused position.
≥VIERA Link function makes it possible to use the
PAUSE LIVE TV function by pressing “Pause”
button on TV remote control. (> 68)
≥PAUSE LIVE TV also works when watching a
programme via external input.
Pause
20:35 22:35
20:35
18:53:50 11.11.2010
Play 18:53.50
DMRXW380EB-VQT2J58_eng.book 20 ページ ２０１０年４月８日 木曜日 午後３時５４分
To Next Page
Loading...
Need help?
General
