Convenient functions
VQT2J58
85
∫ Remote Control
Change the remote control code on the main unit and
the remote control if you place other Panasonic
products close together.
≥Use “DVD 1”, the factory set code, under normal
circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the number
button ([1] to [6]) for more than 5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
≥Operation is possible only with Panasonic remote
controls with “IR6” printed at the bottom when the
remote control code of this unit is set to “DVD 4”,
“DVD 5” or “DVD 6”.
∫ Clock
If the time is not set correctly, use the settings
listed in the method below.
¾ Automatic
This unit usually obtains time and date
information from digital broadcasts.
But, if the time is not set correctly, set it to “Off”
and perform “Manual Setting”.
¾ Manual Setting
1 Select “Off” of “Automatic”, then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the settings.
¾ Time Zone
Adjust the time data automatically or from
GMT -6 to + 6.
DVD
IR6
Clock
Time Date
Time Zone
Automatic
Please set the clock.
OK: access RETURN: leave
OK
RETURN
0
00
10
Automatic
On
11
2010
DMRXW380EB-VQT2J58_eng.book 85 ページ ２０１０年４月８日 木曜日 午後３時５４分
To Next Page
Loading...
Need help?
General
