Troubleshooting
VQT2J58
97
Picture regularly breaks up on some
channels.
¾ Adjust the aerial reception with “Manual Tuning”.
(> 76)
Picture very infrequently breaks up on some
or all channels.
¾ Electrical atmospheric interference caused by local
or distant lightning storms or heavy rain with wind
in “leafy” locations may cause pictures to break up
and audio to mute or distort momentarily.
After the Auto-setup, there aren’t any
channels in the channel list.
¾ The Auto-setup was started and interrupted.
Do an Auto-setup again.
VIERA Link doesn’t work.
¾ Some functions may not work depending on the
version of “HDAVI Control” of the connected
equipment. This unit supports “HDAVI Control 5”
functions.
¾ If the connection for the equipment connected with
HDMI was changed, or if there was a power failure
or the plug was removed from the household
mains socket, “HDAVI Control” may not work.
In this case, change TV (VIERA) setting for
“HDAVI Control” again.
You cannot access this unit from DLNA
compatible equipment on the network.
¾ Check the network connection and the network
settings. (> 10, 13, 66, 84)
¾ It may not be possible to connect depending on the
types of the equipment or the status of the
equipment.
To return all the settings other than the main
ones to the factory preset
¾ Perform “Shipping Condition” or “Default Settings”.
(> 86)
To reset the ratings level settings
¾ While the disc tray is open, press [DRIVE
SELECT] to select the DVD drive, then press and
hold [¥ REC] and [1](PLAY/a1.3) on the main
unit at the same time for 5 or more seconds.
Broadcast
VIERA Link
Network
To reset this unit
DMRXW380EB-VQT2J58_eng.book 97 ページ ２０１０年４月８日 木曜日 午後３時５４分
To Next Page
Loading...
Need help?
General
