Convenient functions
VQT2J58
82
Changing the unit’s settings
∫ On-Screen Information
Choose the approximate time until the channel
information screen (> 17) disappears automatically.
∫ Unit’s Display
Changes the brightness of the unit’s display.
≥If “Dim” is selected the display turns dark during play
and disappears when the unit is turned off. It
reappears momentarily if a button is pressed. While
using this mode, the standby power consumption
can be reduced.
∫ Screen Saver
This is to prevent burn-in on the screen.
≥If “On” is selected, the masked-off area on the
screen becomes grey.
Depending on the condition of the unit (Connection,
Setting) the masked-off area on the screen becomes
grey.
Depending on the connected equipment, some items
may be shaded in grey on the display and cannot be
selected, or you may not be able to change the
settings.
∫ TV Aspect
Set to match the type of TV connected.
∫ Aspect for 4:3 Video
To play a 4:3 title, set how to show pictures on a 16:9
widescreen TV.
∫ TV System
Set in accordance with the TV System for the
connected TV.
How to access each item.
>Others> Setup
> Display or Connection
Display
Connection
16:9
When connected to a 16:9 widescreen TV.
4:3
When connected to a 4:3 aspect TV,
side picture is trimmed for 16:9
picture.
The pictures may be shown in the
letterbox style depending on the
content.
Letterbox
When connected to a 4:3 aspect TV,
black bands appear for 16:9 picture.
DMRXW380EB-VQT2J58_eng.book 82 ページ ２０１０年４月８日 木曜日 午後３時５４分
To Next Page
Loading...
