Troubleshooting
VQT2J58
93
Screen size is wrong.
¾ Check the “TV Aspect” or “Aspect for 4:3 Video”.
(> 82),
¾ Adjust the aspect ratio setting on TV. Refer to your
TV’s operating instructions.
¾ If the 16:9 aspect ratio image is output to a 4:3 TV
and the image will be stretched vertically, set “TV
Aspect” to “4:3”. (> 82)
¾ Check “Aspect for Recording” before recording or
file conversion. (> 79)
¾ If you connect to 4:3 TV, set “HDMI Video Format”
to “576p/480p”. (> 83)
Pictures do not appear with the HD quality
although HD setting was made.
¾ The pictures are output with 576p/480p depending
on the programme.
The screen changes automatically.
¾ If there is no operation for 5 minutes or more, the
displayed screen switches to the other states
automatically (only when the “Screen Saver” is set
to “On”). (> 82)
There is a lot of image lag when playing
video.
¾ Set “HD optimizer” in the Picture menu to “Off”.
(> 71)
The images from this unit do not appear on
the TV.
The picture is distorted during play, or video
will not play correctly.
¾ Check the connection and the TV’s input settings.
¾ The unit’s “TV System” setting differs from the TV
system used by the disc now playing. While
stopped, keep pressing [∫] and [< OPEN/
CLOSE] on the main unit for 5 or more seconds.
The system switches from PAL to NTSC or vice
versa. (> 82)
¾ Picture may not be seen when more than 4
devices are connected with HDMI cables.
Reduce the number of connected devices.
¾ The picture may be distorted or a black screen
may appear between scenes recorded with
different aspect ratios.
¾ DVD-R DL and +R DL discs have two writable
layers on one side. Video and audio may
momentarily cut out when the unit is switching
layers.
¾ Set “Deep Colour Output” or “Contents Type Flag”
in the Picture menu to “Off”. (> 83)
No sound.
Distorted sound.
¾ Check the connections or amplifier’s settings.
(> 8, 89)
¾ To output audio from a device connected with an
HDMI cable, set “HDMI Audio Output” to “On”.
(> 83)
Cannot switch audio.
¾ You cannot switch the audio if “Digital Audio
Output” is set to “Bitstream” (> 81)
TV screen and video
Sound
DMRXW380EB-VQT2J58_eng.book 93 ページ ２０１０年４月８日 木曜日 午後３時５４分
To Next Page
Loading...
Need help?
General
