Getting started
VQT2J58
8
Basic Connection
≥Before connection, turn off all equipment and read the appropriate operating instructions.
≥Other Connections (> 89)
When connected to an HDMI compatible unit, you can enjoy high quality, digital video and audio.
≥The HDMI connection supports VIERA Link “HDAVI Control” (> 68).
BE SURE TO READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3
Required setting:
Set “HDMI Video Mode” and “HDMI Audio Output” to “On” (> 83).
(The default setting is “On”.)
After completing the connections, proceed to Easy setting (> 11).
≥ Keep the RF coaxial cables as far away as possible from other cables.
≥ Do not roll up the RF coaxial cables.
HDMI IN
AV
RF IN
HDMI
AV OUT
AV1 (TV)
RF
IN
RF
OUT
AC IN
HDMI cable
21-pin Scart cable
Aerial cable
RF Coaxial cable (supplied)
AC mains lead (supplied)
TV’s rear panel
This unit’s rear panel
To household mains socket
(AC 220 to 240 V, 50 Hz)
Connect only after
all other
connections are
complete.
To the aerial
DMRXW380EB-VQT2J58_eng.book 8 ページ ２０１０年４月８日 木曜日 午後３時５４分
To Next Page
Loading...
