With Other Equipment
VQT2J58
63
Recording disc: [HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
Recording mode: XP, SP, LP, EP
1 Turn off this unit and DV equipment.
2 Connect the DV equipment (> 62).
3 Turn on this unit.
4 Turn on the DV equipment, and pause play
at the point you want recording to start.
5 Select “Rec to HDD” or “Rec to DVD”,
then press [OK].
6 Press [REC MODE] to select the recording
mode.
7 Select “Start”, then press [OK].
To stop recording
Press [∫].
≥ It is not possible to operate the unit from DV equipment.
≥ The DV input cannot be connected to a computer, etc.
≥ The DV equipment name may not be shown correctly.
Recording disc: [HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
Recording mode: FR
1 While stopped
Press [INPUT SELECT] to select the input
channel.
e.g., If you have connected to AV2 input terminals,
select “AV2”.
2 While stopped
Press [FUNCTION MENU].
3 Select “Others”, then press [OK].
4 Select “Flexible Recording via AV input”,
then press [OK].
5 Select “Hour” and “Min.” and set the
recording time.
6 Start play on the other equipment.
7 Select “Start”, then press [OK].
To stop recording partway
Press [∫].
To show the remaining time
Press [STATUS ].
DV Automatic Recording
If the DV automatic recording function does not work
properly, check the connections and settings, and
turn the unit off and back on.
If that does not work, follow the instructions for
manual recording (> 62).
DV Automatic Recording
Rec to DVD
Rec to HDD
OK
RETURN
Record from the DV unit.
Which do you want to record to?
Flexible Recording via AV input
RETURN
OK
Flexible Recording via AV input
Please set recording time. Record in FR mode.
Maximum recording time
Set recording time
Hour
8
Min.
00
Start
Cancel
8 hour 00 min.
DMRXW380EB-VQT2J58_eng.book 63 ページ ２０１０年４月８日 木曜日 午後３時５４分
To Next Page
Loading...
Need help?
General
