Convenient functions
VQT2J58
67
When “DLNA Function” is deactivated
make the following settings.
1 While stopped
Press [FUNCTION MENU].
2 Select “Others”, then press [OK].
3 Select “Setup”, then press [OK].
4 Select “Network”, then press [OK].
5 Select “Network Settings”, then press [OK].
6 Select “Home Network ( DLNA ) Settings”, then
press [OK].
7 Select “Home Network ( DLNA ) function”, then
press [OK].
8 Select “On”, then press [OK].
≥“Power Save in Standby” in the Setup is set to
“Off”. (> 84)
9 Select “Registration type for remote devices”, then
press [OK].
: Select “Automatic” or “Manual”, then press [OK].
To register equipment manually
After selecting
“Manual” in step : (> left)
1 Select “Named devices” or “Unnamed devices”,
then press [OK].
2 Named devices
Select “Add new device” then press [OK].
Unnamed devices
Select the MAC Address for the connected
equipment, then press [OK].
3 Select “Yes”, then press [OK].
4 Access this unit from the connected DLNA
compatible equipment within 10 minutes.
To deregister equipment
After selecting “Manual” in step : (> left)
1 Select “Named devices” or “Unnamed devices”,
then press [OK].
2 Select the equipment, then press [OK].
3 Select
“Yes ”.
To set the name of this unit for displaying on the
connected equipment
After performing step 8 (> left)
1 Select “Setting device name”, then press [OK].
2 Select “Select from a preset list” or “Create name”,
then press [OK].
3 Select from a preset list
Select the preset name, then press [OK].
4 Create name
Enter the name. (> 74, Entering text)
Automatic All connected devices on the
same network can access this
unit.
4 Panasonic DLNA compatible
equipment and 12 Non-
Panasonic DLNA compatible
equipment will be automatically
registered.
≥Equipment registered earliest
will be deregistered when the
5th Panasonic DLNA compatible
equipment or 13th Non-
Panasonic DLNA compatible
equipment is connected to this
unit.
≥Ensure that the router for your
home network has adequate
security system to prevent
unauthorized access.
Manual Select the devices to register.
(> right, To register equipment
manually)
RETURN
Home Network (DLNA) Settings
OK
On
Automatic
Home Network (DLNA) function
Setting device name
Registration type for remote devices
Named devices
Unnamed devices
Named
devices
Four Panasonic DLNA
compatible equipment can be
registered.
≥Even if it is Panasonic
equipment, you may not be able
to register from “Named
devices”. In this case select
“Unnamed devices”.
Unnamed
devices
12 non-Panasonic DLNA
compatible equipment can be
registered.
DMRXW380EB-VQT2J58_eng.book 67 ページ ２０１０年４月８日 木曜日 午後３時５４分
To Next Page
Loading...
Need help?
General
