148
DP-8032/8025
2008Ver.1.2
• Jam Sensor Location of Finisher
• Jam Sensor Location of i-ADF
• Jam Sensor Location of ADF
Jam Error Codes (J Code) Table
Code Contents Section
J00 The Registration Sensor does not detect paper within a predetermined time after the
paper starts feeding. (Sheet Bypass)
C
J01 The Registration Sensor does not detect paper within a predetermined time after the
Paper Feed Roller starts rotating. (1st Feeder Unit)
C
J02 The 2nd Registration Sensor does not detect paper within a predetermined time after
the Paper Feed Roller starts rotating. (2nd Feeder Unit)
D2
J03 The 3rd Registration Sensor does not detect paper within a predetermined time after
the Paper Feed Roller starts rotating. (3rd Feeder Unit)
D3
J04 The 4th Registration Sensor does not detect paper within a predetermined time after
the Paper Feed Roller starts rotating. (4th Feeder Unit)
D4
Finisher Registration Sensor
Finisher Exit Sensor
Stapler
Original Detection Sensor
Eject Sensor
Duplex Eject Sensor
Read Point
Sensor
Original Length Sensor
Original Detection Sensor
Eject Sensor
Read Point
Sensor
To Next Page
Loading...
