256
DP-8032/8025
2008Ver.1.2
4. Select “00 FAX Service Mode”.
5. Select “01 Function Param. Setting”.
6. Select the “” button, and select “005 Destination Code”.
7. Select the “CHANGE” button.
8. Input the new Destination Code, and select the “OK” button twice.
9. Press the “STOP” key.
10. Press the “FUNCTION”, and “C (CLEAR)” keys simultaneously to exit the Service Mode.
11. Turn the Power Switch on the Left side of the machine to the OFF, and back to the ON position to
enable the parameter settings.
To Next Page
Loading...
