267
DP-8032/8025
2008Ver. 1.2
(16) Remove 1 Screw.
(17) Remove the Connector Cover (Clear Blue).
(18) Disconnect the Harness.
(19) Loosen 1 Screw.
(20) Slide the Process Unit out.
Caution:
To prevent damage to the Process Unit, ensure the
Right Cover is still open before pulling the Process
Unit out.
Caution:
Exercise caution not to scratch the surface of the
OPC Drum (Green), and not to touch it with bare
hands.
Caution:
The OPC Drum is sensitive to light. To prevent optical
exposure problems, do not expose the OPC Drum to
direct sunlight or bright light (even if it is a 1000-Lux
fluorescent lamp).
(21) Slide the 1st Paper Tray out.
(22) Remove 3 Screws.
(23) Remove the Front Left Cover.
To Next Page