299
DP-8032/8025
2008Ver. 1.2
(36) Place the Finisher on the Base Bracket.
Note:
Make sure that 2 Lock Levers Hook into the Guide
Bracket properly.
(37) Install 2 Slide Guide Brackets.
(38) Secure 2 Slide Guide Brackets with 2 Silver Thumb
Screws (PF4124P023).
(39) Install the Finisher Tray Assembly.
(40) Secure the Finisher Tray Assembly with
2 Snap Rings.
(41) Close the Rear Cover and reinstall all Covers.
(42) Connect the Finisher to the Host Machine with the
Interface Cable.
(43) Plug the AC Power Cord into the wall outlet and turn
the Main Power Switch on the Back and the Power
Switch on the Left Side of the machine to the ON
position.
To Next Page
Loading...
