306
DP-8032/8025
2008Ver.1.2
(9) Remove 1 Screw.
(10) Remove the CN Bracket.
(11) Bend the protective Tab on the CN Bracket more
than 90° as illustrated.
(12) Connect the Connector of the i-ADF / ADF.
Note:
When reconnect the Harness, make sure the
connector position and its keys. Insert it gently, and do
not force the connector if it is facing the wrong way.
< For EU and Other Destinations >
After connecting the Connector of the i-ADF / ADF,
secure the Ground Harness with 1 Screw (Short) as
illustrated.
(13) Reinstall the CN Bracket.
(14) Secure the CN Bracket with 1 Screw.
CN Bracket
Black
Black
For EU and Other DestinationsFor EU and Other Destinations
Ground
Harness
Ground
Harness
Screw
(Short)
To Next Page