323
DP-8032/8025
2008Ver. 1.2
<For 2-Paper Tray Configuration>
(1) Open the Right Cover.
(2) Remove 2 Silver Screws.
(3) Remove the Right Rear Cover.
(4) Remove 4 Silver Screws.
(5) Remove 2 Lower Rear Covers.
Caution:
The OPC Drum is sensitive to light. To prevent optical
exposure problems, do not expose the OPC Drum to
direct sunlight or bright light (even if it is a 1000-Lux
fluorescent lamp).
(6) Slide the 1st and 2nd Paper Trays out.
(7) Remove 8 Screws.
(8) Remove 4 Brackets.
(9) Remove 4 Silver Screws.
(10) Open the Rear Cover.
(11) Disconnect the CST2 Harness from SPC PC Board
(CN707).
(12) Close the Rear Cover.
To Next Page
Loading...
