324
DP-8032/8025
2008Ver.1.2
(13) Release the CST2 Harness from the Harness Clamp.
(14) Separate the 2nd Paper Feed Module from the
machine.
Caution:
The machine weights approximately 181 lb (82 kg)
with the i-ADF pre-installed. To prevent injuries, use
the appropriate number of personnel and the proper
equipment to lift or move the machine.
(15) Mount the Heater onto the Heater Bracket.
(16) Install the Heater Assembly.
(17) Secure the Heater Assembly with 1 Screw.
(18) Connect the Heater Assembly to the HT5 Harness.
(19) Install the Harness Clamp.
(20) Insert the HT5 Harness to the Harness Clamp.
To Next Page
Loading...
