325
DP-8032/8025
2008Ver. 1.2
(21) Remove 3 Screws.
(22) Remove the Protection Plate.
(23) Route the HT5 Harness and secure to the Harness
Clamp.
(24) Reinstall the Protection Plate.
(25) Pull the 2nd Paper Tray out.
(26) Install the Protection Sheet.
(27) Place the machine on top of the 2nd Paper Feed
Module.
Caution:
The machine weights approximately 181 lb (82 kg)
with the i-ADF pre-installed. To prevent injuries, use
the appropriate number of personnel and the proper
equipment to lift or move the machine.
(28) Reinstall 4 Brackets.
To Next Page
Loading...
