332
DP-8032/8025
2008Ver.1.2
(22) Pull the 4th Paper Tray out.
(23) Install the Protection Sheet.
(24) Place the machine on top of the 4th Paper Feed
Module.
Caution:
The machine weights approximately 181 lb (82 kg)
with the i-ADF pre-installed. To prevent injuries, use
the appropriate number of personnel and the proper
equipment to lift or move the machine.
(25) Reinstall 4 Brackets.
(26) Remove 2 Screws.
(27) Remove the HP Cover.
(28) Connect the HT2 Harness to the RLB PC Board
(CN174).
(29) Reinstall the HP Cover.
To Next Page