Panasonic DP-8032 - Page 356

356
DP-8032/8025
2008Ver. 1.2
(13) Disconnect all the Harnesses on the CONT PC
Board.
(14) Remove 1 Screw (2633).
(15) Remove the CONT PC Board (3028).
<Removing Rollers>
(16) Lift up the Guide Base (2801) Assembly.
(17) Clean the Exit Roller (2937).
(18) Disconnect the Harness.
(19) Remove 1 Screw (2521) and 1 Screw (2631).
(20) Remove the Guide Base (2832) Assembly.
(21) Release the Tension Spring (3024) and Latch, and
then remove the Lock Arm (3025).