Panasonic DP-8032 - Page 43

43
DP-8032/8025
2008Ver. 1.2
2.2.2. Control Panel Unit
< Cleaning ADF Roller, Pre-Feed Roller, Drive Roller
and Feed 2 Roller>
(1) Open the ADF Cover (1831).
(2) Clean the ADF Roller (1728), Pre-Feed Roller
(1731), Drive Roller (1872) and the Feed 2 Roller
(1753) with a soft cloth, saturated with isopropyl
alcohol.
< Cleaning Exit Roller and Inverting Feed Roller>
(3) Lift the ADF Input Tray (1604).
(4) Open the ADF Exit Cover (1854).
(5) Clean the Exit Roller (1751) and the Inverting Feed
Roller (1853) with a soft cloth, saturated with
isopropyl alcohol.
(1) Pull the Battery Holder (104) part of the way out.
(2) Release the Latch, and remove the Battery Holder
(104) out.
Note:
(a) Replace the Battery.
(b) Reinstall the Battery Holder.