Panasonic DP-8032 - Page 42

42
DP-8032/8025
2008Ver. 1.2
(30) Disconnect all Connectors on the ADF PC Board.
(31) Remove 2 Screws (19).
(32) Remove the ADF PC Board (1907).
(33) Remove 2 Screws (24).
(34) Remove the ADF Motor (1801).
(35) Remove 6 Screws (19).
(36) Remove the Sensor Bracket (1663).
(37) Remove 4 Screws (19).
(38) Remove the Motor Bracket (1811) and Gear
Bracket (1802) Assemblies.
Note:
Apply Molykote EM-50L Grease to all Gears and
Shafts except to the following: E26S35 Drive Gear
(1805), E26S35 Gear F (3305), ADF Motor (1801),
and the shafts of Drive Shaft 2 (1817) and Exit Roller
(1751).