56
DP-8032/8025
2008Ver. 1.2
(7) Disconnect the Harness.
(8) Loosen the Process Unit Screw (743).
(9) Slide the Process Unit out.
Caution:
To prevent damage to the Process Unit, ensure the
Right Cover is still open before pulling the Process
Unit out.
Caution:
Exercise caution not to scratch the surface of the
OPC Drum (Green), and not to touch it with bare
hands.
Caution:
The OPC Drum is sensitive to light. To prevent optical
exposure problems, do not expose the OPC Drum to
direct sunlight or bright light (even if it is a 1000-Lux
fluorescent lamp).
(10) Remove 1 Screw (1Y).
(11) Remove the Front Lock Plate Assembly (751)
(longer plastic tab).
(12) Remove 1 Screw (1Y).
(13) Remove the Rear Lock Plate Assembly (752)
(shorter plastic tab).
(14) Turn the OPC Drum Assembly in the direction of the
arrow and remove.
Caution:
Exercise caution not to scratch the surface of the
OPC Drum (Green), and not to touch it with bare
hands.
To Next Page
Loading...
