59
DP-8032/8025
2008Ver. 1.2
(29) Remove the Cleaning Roller (706).
(30) Remove 2 Bias Charge Roller Holder (728)
Assemblies.
Note:
When reinstalling the Bias Charge Roller Holder
Assembly on the rear side, install the Bias Charge
Roller Holder (728) first and then the Bias Charge
Roller Bushing (726) with the Bushing Coil Spring
(727) as illustrated.
(31) Remove 2 Screws (23).
(32) Remove the Cleaning Blade (704).
(33) Remove the Splash Prevention Sheet (710).
To Next Page
Loading...
