3.4 Technical data
3.4 Technical data
Feature Description
Product number FP-I4C
PLC connection 1 COM1: RS232C via 16-pin spring force plug: Phoenix contact product:
MC0.5/8-ST-2,5
PLC connection 2 COM2: RS232C/RS485 via 16-pin spring force plug: Phoenix contact
product: MC0.5/8-ST-2,5
Power supply 24V DC. Connection with the power supply cable (AFPG805) supplied
with the unit
2x Ethernet connection 10BASE-T / 100BASE-TX autoneg via RJ45 female connector
USB 1 USB 2.0 full speed, 500mA (power supply)
USB 2 USB 2.0 full speed, 100mA (power supply)
LEDs Power, Ethernet, PLC data, USB, memory access, user configurable,
system connection
Protocols and standards TCP/IP, UDP/IP, DHCP, FTP, FTPS, SSH, TELNET, http, https, SMTP,
ESMTP-Auth, POP3, IEC60870, NTP, Modbus, DynDNS, SNMP, Cloud
service, VNC
Flash memory 2.4GBytes user/configuration data
RAM 496MBytes
Operating voltage 24V DC (22.4–26.4V DC supplied by class 2 circuit only)
Current consumption Approx. 75mA at 24V DC (without expansion unit, USB stick,...)
Degree of protection IP20
Ambient temperature 0°C to +55°C
Storage temperature -20°C to +70°C
Humidity Max. 30% to 85% (non-condensing)
Vibration resistance 10Hz to 55Hz, 1 cycle per minute with a double amplitude of 0.75mm;
10 minutes every X-, Y-, and Z-axis
Shock resistance Min. 10g; 4 times every X-, Y-, and Z-axis
Dimensions Height 90mm, width 25mm, depth 64mm
Weight Approx. 110g
Operating conditions Free of corroding gases and excessive influence of dust
CE conformity EMC Standard 89/336/EEC 1989EN 55022/Class BEN 55022/Class
B; EN 61000-4-2/A1; EN 61000-4-3EN 61000-4-4 +A1:2010; EN
61000-4-6
UL approval UL number "2LD7" (file E232530)
FP-I4C 15
To Next Page
Loading...
